WPC PROFILE PRODUCTION LINE

WPC PROFILE PRODUCTION LINEMaterial can be extruded out directly after two grades of mixing, and it can also be extruded by two steps after pelleting. The line is of characteristics of energy and space saving, high output, stable performance etc. Preheating feeder is installed at the top of extruder, which will dry the wood powder firstly, thus perfect plasticization is guaranteed. Special-designed screw will minimize cutting force, which provents wooden fiber from being damaged. Both screw and barrel are speacial-treated, which are featured of abrasion proof and long life-span. This production line is consisted of conical twin-screw extruder, vacuum calibration table, haul-off unit and stacker, and also coordinated with different kinds of moulds to produce PVC door & window profiles, foamed special-shaped profiles, decoration plates etc.The end products PE, PP or PVC wood plastic compound profiles are of wide application, which are mainly be used for trays, box boards, flooring, outdoor decorative materials and so on. The wood and plant fiber increasing rate is very high(up to 50-75%), and the line is of good adoptability, wich can be used for process different materials such as PP,PE,PVC, ABS, PS and so on. Main Technical Parameters ExtruderSingle screwConical twin screwParallel twin screwModelFST165/28FST190/28FST120/28FST65/132FST80/156FST92/188FST75/44FST92Drive power(kw)305590375511075132Max capacity(kg/h)50-6080-100150-200120280350300500Center height(mm)10501050105010501050110010501050Weight(KG)12002000400040005500800050008800